[NRVR-Members] Preparing for May Launch

Adrien Drouault adrien.drouault at gmail.com
Thu May 17 12:38:14 CDT 2018


Turns out, Chris had AT 29/40-120 cases in stock, so I ordered a
replacement from him.  I'll hold off ordering any more CTIs until the next
group order and/or for the July launch.

Adrien


On Wed, May 16, 2018 at 2:50 PM, Carlos Zapata <ctzap at outlook.com> wrote:

> There’s no need to bother with a group order for May launch. Everyone is
> at LDRS in Cal.
> Poor planning on the clubs management behalf...
> Carlos
>
> Get Outlook for iOS <https://aka.ms/o0ukef>
> ------------------------------
> *From:* nrvr-members-bounces at server2.nrvr.org <
> nrvr-members-bounces at server2.nrvr.org> on behalf of Thomas Tweeks Weeks <
> tom at theweeks.org>
> *Sent:* Monday, May 14, 2018 11:10:43 PM
> *To:* NRV Rocketry Members
> *Subject:* Re: [NRVR-Members] Preparing for May Launch
>
> Thanks for the reminder Bob.. We don't want to rub our remaining motor
> vendors the wrong way. I don't have an order in with Chris yet.. but I'm
> planning on ordering a couple of 75mm CTI Ls from him for the July launch.
>
> NOTE: For the on-site motor vendor orders for the July launch, and
> anything over 54mm.. Chris asks to please have your orders in by the end of
> June.  He keeps a little bit of the bigger stuff on hand, but his inventory
> is mostly 54 and below..  and the bigger stuff just takes longer.  If
> unsure.. call him. He's super responsive and up front on delivery times,
> and seems to be very reliable.
>
> Tweeks
>
> On Monday, May 14, 2018 11:20am, "Bob Schoner" <bob.schoner at gmail.com>
> said:
>
> > _______________________________________________
> > NRVR-Members mailing list
> > NRVR-Members at mail.nrvr.org
> > http://server2.nrvr.org/mailman/listinfo/nrvr-membersI doesn’t matter
> to me
> > which vendor we use for a bulk order for May. We are
> > having Chris’s Rickets show up at our July launch so we want him to feel
> > like he has our support. Please don’t change any of your pending orders.
> >
> > At this point do we have bulk orders pending from both Wildman and Chris?
> >
> > Thanks
> > Bob
> > On Sun, May 13, 2018 at 7:27 PM Eric Paterson <egpaterson at gmail.com>
> wrote:
> >
> >> I also have an order in with Wildman.   I ordered a bunch of k-motors
> >> which their website  said were in stock, but actually were not.  So, I
> am
> >> waiting.  Hopefully they arrive so I can fly the Saab RB05A/98 on a K
> >> instead of L, which sims at almost 10K on the Ls.
> >>
> >> Sent from my iPad
> >>
> >> On May 13, 2018, at 6:45 PM, Carlos Zapata <ctzap at outlook.com> wrote:
> >>
> >> I think Bob needs motors.
> >>
> >> If you all need me to initiate it, Let me know…
> >>
> >> I get an extra discount from Wildman….
> >>
> >>
> >>
> >> Carlos Zapata
> >> ctzap at outlook.com
> >>
> >>
> >> ------------------------------
> >> *From:* nrvr-members-bounces at server2.nrvr.org <
> >> nrvr-members-bounces at server2.nrvr.org> on behalf of Adrien Drouault <
> >> adrien.drouault at gmail.com>
> >> *Sent:* Sunday, May 13, 2018 6:11:19 PM
> >> *To:* NRV Rocketry Members
> >> *Subject:* Re: [NRVR-Members] Preparing for May Launch
> >>
> >> I would love to; so far, no one else has said anything, that I know of.
> >>
> >> On Sun, May 13, 2018 at 8:55 AM, Carlos Zapata <ctzap at outlook.com>
> wrote:
> >>
> >>> Anyone placing an motor order?
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> Carlos Zapata
> >>> ctzap at outlook.com
> >>>
> >>>
> >>> ------------------------------
> >>> *From:* nrvr-members-bounces at server2.nrvr.org <
> >>> nrvr-members-bounces at server2.nrvr.org> on behalf of Adrien Drouault <
> >>> adrien.drouault at gmail.com>
> >>> *Sent:* Friday, May 11, 2018 11:35:52 PM
> >>> *To:* NRV
> >>> *Subject:* Re: [NRVR-Members] Preparing for May Launch
> >>>
> >>> Fair enough.  I'll manage.
> >>>
> >>> On Fri, May 11, 2018, 23:00 Thomas Tweeks Weeks <tom at theweeks.org>
> wrote:
> >>>
> >>>> Well.. honestly, I was just asking to get anyone else to speak up in
> >>>> hopes you all could connect. :)
> >>>>
> >>>> I got my motors in last month's big order.
> >>>>
> >>>> Tweeks
> >>>>
> >>>> On Friday, May 11, 2018 8:47am, "Adrien Drouault" <
> >>>> adrien.drouault at gmail.com> said:
> >>>>
> >>>> > _______________________________________________
> >>>> > NRVR-Members mailing list
> >>>> > NRVR-Members at mail.nrvr.org
> >>>> > http://server2.nrvr.org/mailman/listinfo/nrvr-membersI would
> >>>> definitely like to
> >>>> > get an order in.  Even if it's just the two of
> >>>> > us, 1/2 the hazmat is better than all of the hazmat.
> >>>> >
> >>>> > On Thu, May 10, 2018 at 11:49 PM, Thomas Tweeks Weeks <
> >>>> tom at theweeks.org>
> >>>> > wrote:
> >>>> >
> >>>> >> Oh.. if anyone is doing a motor order.. please share the details
> here
> >>>> if
> >>>> >> it's not too late to combine. Save each of us some thweet moolah.
> >>>> >>
> >>>> >> Tweeks
> >>>> >>
> >>>> >> On Monday, May 7, 2018 11:52pm, "Adrien Drouault" <
> >>>> >> adrien.drouault at gmail.com> said:
> >>>> >>
> >>>> >> > _______________________________________________
> >>>> >> > NRVR-Members mailing list
> >>>> >> > NRVR-Members at mail.nrvr.org
> >>>> >> > http://server2.nrvr.org/mailman/listinfo/nrvr-membersIf there's
> >>>> >> interest, count me
> >>>> >> > in for some motors.
> >>>> >> >
> >>>> >> > I know RSO/LCO require certification; does the LD require it?
> >>>> >> >
> >>>> >> >
> >>>> >> > On Mon, May 7, 2018, 23:23 Thomas Tweeks Weeks <tom at theweeks.org
> >
> >>>> wrote:
> >>>> >> >
> >>>> >> >> Anyone planning a bulk motor order for the May launch?
> >>>> >> >>
> >>>> >> >> Just 2.4 weeks out.
> >>>> >> >>
> >>>> >> >>
> >>>> >> >>
> >>>> >> >> Also.. if anyone wants to help out by functioning as the Launch
> >>>> >> Director,
> >>>> >> >> please let us know. Bob can brief you doing the Launch
> >>>> Notification (a
> >>>> >> >> couple days prior to launch) and calling in the FAA waiver the
> day
> >>>> of..
> >>>> >> and
> >>>> >> >> I can help with the trailer if you don't have the means to haul
> it.
> >>>> >> >>
> >>>> >> >>
> >>>> >> >>
> >>>> >> >> Other than that, we just need a couple folks to help our as RSOs
> >>>> and
> >>>> >> LCOs
> >>>> >> >> and we're set.
> >>>> >> >>
> >>>> >> >>
> >>>> >> >>
> >>>> >> >> Volunteers?
> >>>> >> >>
> >>>> >> >>
> >>>> >> >>
> >>>> >> >> Tweeks
> >>>> >> >>
> >>>> >> >>
> >>>> >> >>
> >>>> >> >>
> >>>> >> >> _______________________________________________
> >>>> >> >> NRVR-Members mailing list
> >>>> >> >> NRVR-Members at mail.nrvr.org
> >>>> >> >> http://server2.nrvr.org/mailman/listinfo/nrvr-members
> >>>> >> >
> >>>> >>
> >>>> >>
> >>>> >>
> >>>> >> _______________________________________________
> >>>> >> NRVR-Members mailing list
> >>>> >> NRVR-Members at mail.nrvr.org
> >>>> >> http://server2.nrvr.org/mailman/listinfo/nrvr-members
> >>>> >>
> >>>> >
> >>>> >
> >>>> >
> >>>> > --
> >>>> > --
> >>>> > *Quid quid latine dictum sit altum viditar.*
> >>>> >
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> NRVR-Members mailing list
> >>>> NRVR-Members at mail.nrvr.org
> >>>> http://server2.nrvr.org/mailman/listinfo/nrvr-members
> >>>>
> >>>
> >>> _______________________________________________
> >>> NRVR-Members mailing list
> >>> NRVR-Members at mail.nrvr.org
> >>> http://server2.nrvr.org/mailman/listinfo/nrvr-members
> >>>
> >>
> >>
> >>
> >> --
> >> --
> >> *Quid quid latine dictum sit altum viditar.*
> >>
> >> _______________________________________________
> >> NRVR-Members mailing list
> >> NRVR-Members at mail.nrvr.org
> >> http://server2.nrvr.org/mailman/listinfo/nrvr-members
> >>
> >> _______________________________________________
> >> NRVR-Members mailing list
> >> NRVR-Members at mail.nrvr.org
> >> http://server2.nrvr.org/mailman/listinfo/nrvr-members
> >
>
>
>
> _______________________________________________
> NRVR-Members mailing list
> NRVR-Members at mail.nrvr.org
> http://server2.nrvr.org/mailman/listinfo/nrvr-members
>
> _______________________________________________
> NRVR-Members mailing list
> NRVR-Members at mail.nrvr.org
> http://server2.nrvr.org/mailman/listinfo/nrvr-members
>



-- 
--
*Quid quid latine dictum sit altum viditar.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://server2.nrvr.org/pipermail/nrvr-members/attachments/20180517/31581018/attachment.html 


More information about the NRVR-Members mailing list